Wednesday, 27 May 2015

Avantek Panshot CT-C01 Selfie Stick Cable Control

Avantek


"Created by a group of passionate young people who wish to offer products that bring more convenience and style to life, AVANTEK products are specifically designed to make your smart life much easier and to cater to people's demands in modern times.


We strive to provide products with the highest quality and service, completing with the highest standards. Our goal is 100% customer satisfaction, which we will achieve by offering reliable and affordable products, backed up by value-added services."


PanShot LT-C01 Selfie Stick


Product and Specifications

Brand AVANTEK
Item Weight 227 g
Product Dimensions 26.4 x 6.6 x 4.1 cm
Item model number LT-Selfie Stick
 20150526_164430 (768x432)  
Fully compatible with most Android and Apple smartphones; supports GoPro camcorders
Plug-and-Play, no Bluetooth pairing needed. Just plug it into the audio port of the phone and you're ready to snap
Comes completely assembled with fold-able phone holder and built in remote control without the hassle of installation. The 270-degree adjustable phone holder allows a variety of shooting angles from selfies to above-crowd shots
Extends from 9 inches (23 cm) to 38 inches (97 cm). Folds flat for ultimate portability and fits easily into your purses or backpacks
Lightweight yet strong: Built out of highly durable aluminium stick featuring innovative twist-to-lock technology ensures accident-free photography.

Opening the box you can see that it comes with a cable control selfie stick, wrist strap, bag and user manual.

1 x Selfie Stick
1 x Wrist Strap
1 x Waterproof Carry Bag
1 x User Manual

Simple to use and so simple to setup 

 


 Loosen off  the knob and unfold the the phone holder gently until it stops. Approximately 270d angle.
Once you have done this holding the phone holder section and the bottom of the selfie stick with the hand on the handle  gently turn the handle to the left and there you go you have just unlocked the PanShot LT-C01 Selfie Stick.
To lock the PanShot LT-C01 Selfie Stick when in use just simply follow as above but turn to the right, That's it done.
To connect your phone simply insert your phone into the phone holder section adusting correctly and then connect the cable that's connected to the stick to your audio port and your done.
The trigger is located on the SnapShot Stick handle which you will be operating with your thumb.
 
The Phone holder section has support grips on each side with a lip on all four sections. The lip on these sections is to stop your phone from sliding off giving a very secure grip.
The tension for adjustments between your phone width is very strong  meaning that this really dose get a grip of your phone. The phone holder section will adjust from 5cm up to 8cm giving the PanShot LT-C01 Selfie Stick has very good range to work with most mobile phones.
On extending the PanShot LT-C01 with the phone connected, It doesn't feel too heavy for the stick meaning that the PanShot is very comfortable to use and very nice for getting some angled shots.

The Test

Testing this product today I'm gonna use the Iphone 4S , Samsung S5 and why not the Samsung S6

Iphone

On connecting the Iphone 4S to the stick was very simple and very secure with its case on. Yes with it's case on I didn't need to take it out of it's case.
The phone camera worked straight away without the need of any additional software such as the camera 360.
Photos taken and works straight from the box. 

Samsung S5

On connecting the Samsung S5 to the stick this too was very simple and very secure with its case on.
The phone camera on the Samsung S5 also worked straight away without the need of any additional software such as the camera 360.
Photos taken and works straight from the box.  

Samsung S6

  On connecting the Samsung S6 to the stick I had to remove my case and it was about 0.5cm too big for the PanShot Stick. I have to admit that my case is very large for this phone but was very secure when connected.
The phone camera on the Samsung S6  too worked straight away without the need of any additional software such as the camera 360.Photos taken and works straight from the box.


Would I recommend this product  YES

This is a portable and stylish black selfie device compatible with Bluetooth smart phones and GoPro cameras.

Camera 360 available from any of the app stores Apple or play store
The stick it'self is lockable for safe use and has a trigger button very simple to press located on the handle section.

I've taken some very amazing photo's using these new angles I can get thanks to this product.

Although the brands of phones used in this review do work without the additional software, The camera 360 software is available on any of the app stores for those that don't .

 Please read the manual before use

 

So is this a product worth buying well of course check out the link below for more information

 

 Thanks for checking out JCONTHEBLOG


Friday, 22 May 2015

CP-07 Premium Laptop Cooling Pad

Avantek




Company Background

"Created by a group of passionate young people who wish to offer products that bring more convenience and style to life, AVANTEK products are specifically designed to make your smart life much easier and to cater to people's demands in modern times.

We strive to provide products with the highest quality and service, completing with the highest standards. Our goal is 100% customer satisfaction, which we will achieve by offering reliable and affordable products, backed up by value-added services."


CP-07 Premium Laptop Cooling Pad

Ultra Slimline design 
140mm blue LED fan with long service lifetime up to 20,000 hours
3 settings of adjustable height
Spare USB port
LED on/off switch
Speed control for fan
Lightweight and quiet
2x Rubber Grips

Inside The Box






Here we have a very well packaged laptop cooling pad with lots of information regarding the product all over the box.
The Avantek cooling tray has be packed in bubble wrap to give it that extra protection.
 Inside the box is also a manual and 2x rubber grips each has a very strong sticky back.

On opening the legs the legs to position 2 and 3 you can see they lock into place very securely giving a very comfortable position for any user. There are 3 usable positions on the CP-07
 Looking at the left hand side of the cooler you can see the two USB ports, also on and off wheel for the fan with speed control, and finally the on and off switch for the LED 


Setup is very simple just remove the cable provided from underneath the cooler.
Connect one side of the cable to the laptop using any USB 2.0 or USB 3.0. Any of these ports will work for this product.
Connect the other side of the cable to the Avantek laptop cooler (CP-07) and your good to go.
Switch on the LED and turn the fan to your desired level and that's it your done.

Once USB connection has been made and you switch on your laptop you can see that is a nice clear and bright blue LED. The fan has an adjustable speeds between 800 - 1350rpm with long service lifetime up to 20,000 hours .


 As we look at the underneath of the Aventec CP-07, you can see how tidy everything is. 
This with it's ultra slimline look it really dose makes this a good choice for both performance and potability.


Both my laptops sit very securely on this cooling tray very easily. 
I would also like to point out it's important to take a look at the bottom of your laptop just so you know where to put the grip-pads on the cooler.
Don't forget to do this part or when you tilt the unit you could end up with your laptop sliding off.
It is as with any product to read the user manual provided before use. It's the best way to avoid any accident's.

The Test

MSI GE70 2PL Running 6 hours of video play before laptop cooler installed temperature 32c
Acer Aspire 6930 Running 6 hours of video play before laptop cooler installed temperature 42c

After the 6 hour test on my MSI laptop GE70 2PL which is a 17.3 Inch laptop temps maintained at 29c during a 6 hour video loop.
After the 6 hour test on an Acer Aspire 6930 which is a 16 Inch laptop temperatures maintained at 36c 

The results show that both laptops had a drop in temperature  


My MSI Laptop had dropped by 3 degrees while the Acer Aspire 6930 had dropped by 6c definitely making it worthwhile for this one.

So is this a product worth buying well of course check out the link below for more information





Thanks for checking out JCONTHEBLOG.

Tuesday, 19 May 2015

AVANTEK Wireless Doorbell

AVANTEK

Wireless Doorbell


"Created by a group of passionate young people who wish to offer products that bring more convenience and style to life, AVANTEK products are specifically designed to make your smart life much easier and to cater to people's demands in modern times.


We strive to provide products with the highest quality and service, completing with the highest standards. Our goal is 100% customer satisfaction, which we will achieve by offering reliable and affordable products, backed up by value-added services."


Box Contains
1 Transmitter
1 Receiver
Fittings
Manual

Product Features

Wireless receiver and transmitter
48 music chimes 
4 level adjustable volume control
Up to 200 meter range for remote control
Ultra low power consumption
Sleek design with blue LEDs


 As you can see by the picture above the button on the left is for the volume level. 
The button on the right is for your choice of ring tone. 
There are an impressive 48 chimes to choose from so there is definitely something here for everyone's taste.
The transmitter cover comes off very easily for first install or battery replacement. 
There are no fiddly bits with this product.
The transmitter is powered by a 23A 12V battery 
which are available at most retailers

The receiver above will connect to any 3pin 220-240v socket

It's been made to be as simple as possible to 
connect and it really is just that.
With double sided sticky pads provided 
or even a screw fitting all of these have been included in this little bundle.

So how dose it sound.

I have the receiver connected at the back of my house 
and the transmitter to the front door.
I have connected the transmitter with the sticky pads provided.
This works really well and is definitely loud enough for me. 
Although me and missis can't agree on a ringtone yet it dose the job it's suppose to very well. 



Thanks for checking out JCONTHEBLOG.