X-Sense DS21

X-Sense DS21 Photoelectric Smoke Alarm

Avantek

Company Background

"Created by a group of passionate young people who wish to offer products that bring more convenience and style to life, AVANTEK products are specifically designed to make your smart life much easier and to cater to people's demands in modern times.

We strive to provide products with the highest quality and service, completing with the highest standards. Our goal is 100% customer satisfaction, which we will achieve by offering reliable and affordable products, backed up by value-added services."

Alarms

What is the difference between Photoelectric and Ionization smoke alarms?

Ionization Smoke Alarms - more effective at detecting flaming fires, which can have a  combustion extremely  quickly and spreading rapidly throughout. These types of fires can also include paper burning in a wastebasket, or grease fires on a stove.

Photoelectric Smoke Alarms - more effective at detecting smoldering fires which can smolder for hours then bursting into flame. The sources of the fires be anything from a  cigarette smoldering in couches or bedding.

For maximum protection I can only say to install both types of smoke alarms on every level of the home.

Your smoke alarm maintenance:

Replace the battery (as recommended)

Check the alarm by pressing the test button

Ensure no dust and sensor is free

Never remove the battery to use for other purposes

Remember, To Change Your Batteries Always & Never Take Then Out While Your T.V Remote Ain't Working.

   

The X-Sense DS21

Photoelectric Smoke Alarm

AVANTEK

For maximum protection a smoke alarms should be fitted in every room of your house except the bathroom, kitchen and garage.

For minimum protection at least one alarm should be fitted on each level of your house.

Specifications 

Photoelectric Sensor Technology
More Effective at Detecting Slow-Burning Fires
Small Physical Size
Push Button Battery Test
Easy Access Battery Compartment
Audible Alarm: 85 dB
Visual Alert: Red LED
Dimensions: W93mm x D38mm
Warranty: 18 Months

Simple Install

Low Battery Warning

Auto Reset

Dustproof

Anti RFI

Smoke alarms are simply screwed into the ceiling and should normally be fitted at least 30 centimeters (12 inches) away from any wall or light fitting and as close to the center of the room, hallway or landing as possible. Always read the manufacturers instructions before fitting.

Compare this product to a standard smoke alarm and you will discover that this is substantially smaller than most products on the market, the outer casing is made from the same materials that you would see on standard alarms. This alarm has an impressive 85db audible alarm which is certainly loud enough. 

This unit is designed to monitor and detect smoke particles and visible particles from a smoldering fire in real time.

The X-Sense DS21 is designed for not only stability but also for the early warning fire protection.

After removing the X-Sense DS21 from the box it is just a simple case of sliding down gently the section that says X-Sense with one or two thumbs. Remove the wrapper from the battery provided. Place battery back into the X-Sense unit. On doing this you will see this unit flash red every 40 seconds.

Hold the test weekly button to test the X-Sense DS21 and you should hear a loud bleeping sound of around 85 decibel.

To mount the X-Sense DS21 simply hold it by the bottom in one hand and gently twist the top to the left, this will release the mounting bracket from underneath. The raw plugs and screws are provided in the box.

With a very easy install , compact and loud alarm this is well worth the price.

Avantek have many quality  designs for their detectors and uses they can be found here at Click Here for more designs

 Thanks for checking out JCONTHEBLOG